Heat Transfer Methods

References

[Chen1962]Chen, J. C. A correlation for boiling heat transfer to saturated fluids in convective flow Ind. Eng. Chem. Process Des. Dev., Vol 5, 322-329, 1962.
[Chisholm1992]Chisholm D. Wanniarachchi, A. S. Maldistribution in single-pass mixed-channel plate heat exchangers. ASME, 1992, 201, 95-99.
[Gnielinski1976]
  1. Gnielinski, “New Equations for Heat and Mass Transfer in Turbulent Pipe and Channel Flow,” Int. Chem. Eng., (16): 359-368, 1976.
[Gungor1987]
    1. Gungor and R. H. S. Winterton, “Simplified general correlation for saturated flow boiling and comparison with data,” Chemical Engineering Research and Design, vol. 65, no. 2, pp. 148-–156, 1987.
[Han2003]Han, D.-H.; Lee, K.-J. & Kim, Y.-H. The Characteristics of Condensation in Brazed Plate Heat Exchangers with Different Chevron Angles Korean Physical Society, 2003, 43, 66-73.
[Huang2012]Huang, Y. P., Huang, J., Ma, J., Wang, Y. L., Wang, J. F., & Wang, Q. W. (2012). Single and Two-Phase Heat Transfer Enhancement Using Longitudinal Vortex Generator in Narrow Rectangular Channel. In An Overview of Heat Transfer Phenomena. IntechOpen.
[Kakaç1998]Kakaç, S. & Liu, H. Heat exchangers: selection, rating, and thermal design, CRC Press, 1998.
[Manglik1995]Manglik and Bergles, Heat transfer and pressure drop correlations for the rectangular offset strip fin compact heat exchanger, Experimental Thermal and Fluid Science, Elsevier, 1995, 10, pp. 171-180. doi:10.1016/0894-1777(94)00096-q.
[Muley1999]Muley, A. and Manglik, R. M., Experimental Study of Turbulent Flow Heat Transfer and Pressure Drop in a Plate Heat Exchanger with Chevron Plates, Journal of Heat Transfer, vol. 121, no. 1, pp. 110–117, 1999.
[Rothfus1957]Rothfus, R. R., Archer, D. H., Klimas, I. C., & Sikchi, K. G. (1957). Simplified flow calculations for tubes and parallel plates. AIChE Journal, 3(2), pp 208–212.
[Savostin1970]Savostin, A. F. & Tikhonov, A. M. Investigation of the Characteristics of Plate Type Heating Surfaces Thermal Engineering, 1970, 17, 113-117.
[Shah1976]Shah, M. M. A new correlation for heat transfer during boiling flow through pipes Ashrae Trans., 1976, 82, 66-86.
[Shah2009]Shah, M. M. An improved and extended general correlation for heat transfer during condensation in plain tubes Hvac&R Research, Taylor & Francis, 2009, 15, 889-913. doi:10.1080/10789669.2009.10390871
[Shibani1977]Shibani and Ozisik, “A solution to heat transfer in turbulent flow between parallel plates”, International Journal of Heat and Mass Transfer, vol. 20-5, pp 565–573, 1977, Elsevier.
[Techo1965]
  1. Techo, R. R. Tickner, and R. E. James, “An Accurate Equation for the Computation of the Friction Factor for Smooth Pipes from the Reynolds Number,” J. Appl. Mech. (32): 443, 1965.
[Yan1999]Yan, Y.-Y. & Lin, T.-F. Evaporation Heat Transfer and Pressure Drop of Refrigerant R-134a in a Plate Heat Exchanger Journal of Heat Transfer Engineering, 1999, 121, 118-127. doi:10.1115/1.2825924
[Zhou2013]
  1. Zhou, X. Fang , D. Li , “Evaluation of Correlations of Flow Boiling Heat Transfer of R22 in Horizontal Channels, “The Scientific World Journal, vol. 2013, Article ID 458797, 14 pages, doi:10.1155/2013/458797